JSKWED
TIG500P AC/DC PULSE INVERTER WELDING MACHINE WITH WATER CHILLER
stars, based on 0reviews
SPECIFICATION
| Model No. | tig-ac/dc 500p | Pulse Current | 10-500A | Clean Width | 25%-75% |
| Input Voltage | 3 phase AC380V 50-60Hz | Welding Current | 10-500A | AC Frequency | 50-150Hz |
| Rated Output Current | 500A | Pulse Frequency | 0.5-100Hz | Degrees of enclosure protection | 1P21S |
| Rated Output Voltage | 30V | Pulse Width Ratio | 0.2-0.8 | Packing size | 1105*630*1285mm |
| Rated Iutput Power | 18kw | Down-Slope Time | 0.1-5s | Gross weight | 152kg |
| No-load Voltage | 70V±3V | Crater Arc Current | 10-500A | IGBT | Module |
| Current Adjusting Range | 10-500A | Post Flow Time | 5-25s | ||
| Start Arc Current | 10-500A | utilization factor | 60% | ||
| Up-Slope Time | 0.1-5s | Efficiency | 83% |
3 in 1,Power source, water chiller and trolley 3 in 1
Multifunctional(TIG AC / TIG DC / MMA). Good at welding aluminum and stainless steel.
IGBT tech, TIG Inverter argon arc welder produced with international igbt advanced technology.
2 panel optional, digital and rotary knob control panel, every parameter can be adjusted accurately.
2 steps and 4 steps, pulse and non-pulse functions, which can meet different welding demands.
One-key reset in digital panel, recovery machine’s factory setup, easy welding.
High frequency arcing, high performance, excellent effect in thin or thick sheet.
Every machine equipped with power line, tig torch, ground electrode, power line and air pipe.
All machines could work with pedal.
- welding machine:
