JSKWED
SUPER TIG250P AC/DC PULSE INVERTER WELDING MACHINE WITH MMA AND AIR PLASMA CUTTING
SPECIFICATION
Model No. | SUPER-250P | ||||
Input Voltage | 1 phase AC220V | TIG | No-load Voltage:65V | Degrees of enclosure protection | 1P21S |
MMA | No-load Voltage: 65V | Rated Output Current: | Dimensions | 570*280*545mm | |
Rated Output Current: | Duty Cycle: 40% | Package size | 640*360*630mm | ||
Duty Cycle: 25% | Up-Slope Time: 0.1~10 Seconds | Machine Weight | 36KG | ||
| | | IGBT | single tube | |
CUT | No-load Voltage: 279V | Down-Slope Time: 0.1-10 Seconds | | |
|
Rated Output Current: 10-60A | Pulse Current Range:10A ~ 250A | | |
| |
Duty Cycle: 35% | Pulse Width Range: 10-90% | | |
| |
Arc starting mode: HF Micro start | Pulse Frequency Range:0.5Hz ~ 50Hz | | |
| |
Arc starting mode:HF Micro start | |
| |||
Multifunctional(TIG ACDC/ MMA/AIR PLASMA CUTTING). Good at welding aluminum and stainless steel And cutting.
IGBT tech, TIG Inverter argon arc welder produced with international igbt advanced technology.
Digital control panel, every parameter can be adjusted accurately.
2 steps and 4 steps, pulse and non-pulse functions, which can meet different welding demands.
One-key reset in digital panel, recovery machine’s factory setup, easy welding.
High frequency arcing, high performance, excellent effect in thin or thick sheet.
Every machine equipped with power line, tig torch&plasma cutting torch, ground electrode, power line, reducing valve and air pipe.
All machines could work with pedal.
- welding machine:
